System Configuration:

This Bulletin Board System runs under the following Setup

Commodore Amiga 2000 - OCS - OS 3.1 on ROM & 1 MB Chip RAM
Commodore Accelerator Card A2630 with 4 Megabytes 32 Bit RAM @ 28Mhz

(
 Which is PARnetted over a Parallel Cable to:
 Amiga 2000 - ECS / OS 2.1 - 1 MB Chip RAM
 Commodore Accelerator Card A2630 with 2 Megabytes 32 Bit RA @ 25Mhz
 ARCNet Card inside but unused... (No Software & Hardware.. AND Money :) )

 WHICH is connected to:
 
  PC 486/Dx4-100Mhz with 540Mb of Space
  14" Monitor from AOC
  (Over PC-2-Amiga Version 2.04 (Killer Utility!) )
)

The BBS Amiga has the following additional Hardware installed:

BSC Multiface Card II for Node 1 and 2
BSC Isdn-Master for Node 3 and 4
GVP I/O Extender (Currently not being used)
1 Gigabyte Harddisk from IBM
1 NEC MultiSpin 3Xi Triple Speed CD-ROM
1 Floppy Disk Drive 3 1/2"
1 Floppy Disk Drive 5 1/4"
1 Flickerfixer Card by Commodore (Thanks to Pothead hehe)
1 US Robotics Modem 14.400 Courier HST Dual Standard
1 US Robotics Modem 21.600 Dual Standard Terbo (Thanks to Dagobah)
1 Packard Bell Monitor that i used to use for the PC.
1 Monochrome Monitor from Commodore (talking about Stereo Watching huh)
1 Commodore Standard Mouse ripped from a Amiga 4000
Workbench 3.0
Kickstart 3.0
KingCon 1.3
Loads of other small Tools to waste more Memory